How Sharp Should a New Knife Be? What to Expect Out of the Box
1What a factory edge actually is
Every knife arrives with the edge its workshop put on it, and there is no industry standard for that last step. Some houses finish by hand. Masakage blades are hand sharpened at Takayuki Shibata's workshop in Fukuyama, and of his own Koutetsu knives his workshop says they are carefully sharpened one by one. Myojin Riki puts a convex hamaguri-ba edge on its knives, a shape the workshop's second generation spent several years of training in Fukui learning. Machine finished lines can arrive very keen too: Shun, for instance, sharpens its knives to 16 degrees per side.
So "how sharp should mine be" starts with "sharp enough to pass the tests below", not with a number. For a sense of the numbers: under an electron microscope, an edge has to be thinned to about one tenth of a micron at its very tip to shave facial hair comfortably. That is razor territory, and a kitchen knife does not need to live there. A working kitchen edge sits a little coarser on purpose, because it has to survive a cutting board.
2Three safe tests, and one to skip
Paper. Hold a sheet of printer paper by a top corner and slice down through it with a light draw, starting at the heel and finishing at the tip, cutting away from the hand that holds the sheet. A good edge cuts a clean, quiet line and the strip curls away. A dull section snags, tears or changes the sound. Slicing paper from heel to tip is exactly how you find a dull section, so run the full length.
Tomato. Set the edge on the skin and draw back with no downward pressure, letting the knife's weight do the work. A sharp edge parts the skin; a blunt one skates. If it slides, note whether it slides everywhere or only in one stretch of blade.
Onion. Take the thinnest slices you can off a halved onion. A good edge passes through skin and all without crushing the layers ahead of it, and each slice comes away whole instead of staying joined to the next.
The arm hair test: skip it. It puts a bare blade against skin, one slip means a cut, and it tells you less than the paper does. The same goes for dragging an edge along a thumbnail. Cut the paper and the tomato, keep your fingers off the edge entirely, and you will know more, with far less risk.
One extra check with no cutting at all: stand the knife edge down on the board with a light behind it and look along the edge. Anywhere light shows underneath is a spot not touching the board, which means a dip in the edge rather than a dull stretch.
3What a good edge feels like
Quiet and willing. Paper parts with a soft hiss rather than a sawing noise. Tomato skin yields the moment the steel touches it. Onions fall into slices instead of holding hands. The knife also stops announcing itself: less force means less juice on the board and less wrist.
Do not judge an edge by eye. A slightly matte or toothy looking edge is how many makers leave them, and a mirror polished bevel can still be blunt. The makers above finish their edges differently from each other on purpose. Test by cutting, not by looking.
4Normal, or a fault
Normal: differences in finish between makers, faint variation along a hand finished bevel, an edge that looks coarser than you expected. None of that is a fault if the paper and tomato tests pass.
Three things are faults, and they each have a fix.
A burr left on. A burr is a thin wire of steel folded over the edge, left behind by whatever last sharpened the knife. The tell is a knife that feels sharp but slides off tomato skin. A few light passes along a folded paper towel or a piece of cardboard usually take it off; stainless steels such as VG-10 and Ginsan cling to their burrs more than carbon steels such as White and Blue, so give them a few more passes. Our burr guide covers it properly.
A chip. A visible nick that catches the paper at the same spot every time. Chips almost always come from hard contact such as bone, frozen food or a ceramic plate. If a knife arrives from us with a chip, contact us straight away. A small one has to be ground out on a coarse stone and worked back up the grits, which is repair work, not maintenance: our chip repair page and our sharpening service both handle it.
An uneven edge. One section of the blade snags on the paper or shows light under it on the board while the rest cuts fine. The paper test maps a dull stretch; the light test finds a dip. A dull stretch usually comes back in one session on a 1000 grit stone; a dip that lets light under the edge needs reprofiling, which our sharpening service does. On a knife that is new from us, contact us first.
5When to give it its first sharpening
Not on day one. A knife that passes the tests is ready to cook with, and sharpening it now just removes steel you could keep. Give it its first stone when the tomato test starts to fail, which for most home cooks is 2 to 3 months in, and every 2 weeks in a working kitchen.
That first session, on a beginner whetstone: one 1000 grit stone is enough (our Naniwa 1000 grit stones run from about A$110 to A$135, and a flattening plate keeps it flat). Copy the angle the maker ground rather than inventing your own: colour the edge bevel with a permanent marker, take a few strokes, and when the ink clears evenly along the whole edge you have found it. Most double bevel Japanese knives sit near 15 degrees per side. Raise a burr along one side, flip, raise it along the other, then finish with very light alternating strokes to take the burr off. Our freehand walkthrough and the angle guide take it stroke by stroke.
If you would rather not do it yourself, our service hand sharpens on whetstones, from $17 for a double bevel under 16 cm and $22 for 16 to 24 cm, with the usual turnaround of 2 days from drop-off.
6The first week
Four habits decide how long that factory edge lasts.
Wash it by hand and dry it straight away. Never the dishwasher: the knife gets knocked around, stays wet the whole cycle, and a wooden handle dries out and loosens. Our dishwasher FAQ gives the full reasons.
If the core is carbon steel, wipe the blade as you go with acidic food such as citrus, tomato or onion, then wash and dry at the end. It is not stainless, and a sitting blade spots. The carbon care guide has the routine.
Cut on wood or soft rubber, never glass, stone, ceramic or a plate, and lift the knife instead of scraping the edge sideways. The board guide explains why; it points to Hasegawa wood-core rubber boards from about A$180, and their non-slip mat, which goes under the board to stop it sliding, from about A$25.
Store it dry, on a strip or in a block, not loose in a drawer. The care hub collects the rest.
7Questions people actually ask
How sharp is a new Japanese knife out of the box?
Sharp enough to slice paper cleanly from heel to tip and bite tomato skin with no more than its own weight behind it. Beyond that, it depends on who finished the edge: Masakage sharpens by hand and Shun states 16 degrees per side for its edges, and neither fact tells you as much as the tests do. The differences past the paper test are real but small.
My new knife snags on paper in one spot. Is it faulty?
Possibly, and the spot is the clue. Run the paper test heel to tip a few times: if the same section snags every pass, that stretch is dull, rolled, chipped or carrying a burr. The paper and light tests narrow down where the trouble is. A burr comes off with paper towel passes, a chip needs repair, and a dull stretch usually comes back on the stone; a dip that lets light under the edge needs reprofiling. If the knife is new from us, contact us and we will sort it out.
Should I sharpen a new knife before its first use?
No, if it passes the paper and tomato tests. A maker's edge that passes those tests is ready to cook with, and sharpening before it needs it just removes steel. Start on the stone when the tomato test begins to fail, roughly every 2 to 3 months of home cooking.
How do I test a knife's edge without cutting myself?
Cut paper, tomato and onion, and nothing else. The arm hair test and the thumbnail scratch put a bare blade against skin to learn something the paper already told you. Keep fingers away from the edge while testing, wash and dry the knife when you are done, and the whole check takes under a minute.
If you would rather have a new edge looked at before you cook with it, our shops in St Peters, Crows Nest, Braddon and Prahran take walk-ins, and every routine sharpening is done by hand on Japanese whetstones.