堺孝行  |  庫存單位: TAK_GB_SKYANAGI300

Sakai Takayuki Genbu (玄武) Blue #2 Sakimaru Yanigiba 300mm w/ Saya

售價 $21,203.00 正常價格 $24,943.00
含稅 結帳時計算運費。

重要提醒:碳鋼刀如未妥善保養,容易快速生鏽或形成氧化膜。需要定期清潔、擦乾及上油。如果您不熟悉碳鋼的保養方式,建議改選不鏽鋼刀款。

庫存狀態

與……相得益彰

詳細規格
刀型 先丸蛸引 / 圓尖刺身刀
刃型 Single Bevel
重量 293 g        10.34 oz
刃長 292 mm   .11.5 inch
刃高 39 mm     .1.54 inch
刀背厚度(根部) 3.9 mm     0.15 inch
刀背厚度(中段) 3.4 mm     0.13 inch
刀背厚度(刀尖 1cm 處) 1.7 mm     0.07 inch
鋼材 青紙二號 | 碳鋼
常見硬度 61 至 63 HRC
刀柄 八角柄 黑檀木 黑色牛角柄箍

透過 DHL Express 提供全球配送,3 至 6 天送達(不適用於英國)。

The Genbu (玄武, Black Tortoise) is one of those knives that reflects the traditional knife-making heritage of Sakai particularly well. Named after the mythical guardian of the north in Japanese folklore, this series is forged by Itsuo Doi, a highly respected blacksmith who inherited the forging traditions of his father, the legendary Keijiro Doi. The Genbu brings together Doi's distinctive forging work and the refined grinding and finishing techniques for which Sakai is famous, resulting in a knife that is both a serious professional tool and a beautiful example of Japanese craftsmanship.

At the heart of the Genbu is Aogami #2 (Blue 2) carbon steel, forge-welded with soft iron cladding in the traditional Ni-mai construction. Blue 2 is one of my favourite choices for a high-end single-bevel knife, offering a good balance between edge retention, sharpness and ease of sharpening. Heat-treated to approximately 62–63 HRC, the steel is hard enough to hold a fine cutting edge through extended slicing sessions while remaining relatively straightforward to sharpen compared with some of the more wear-resistant modern steels. The soft iron cladding also makes maintaining the wide primary bevel easier, although both the core and cladding are reactive and require regular wiping and drying.

The 300mm Sakimaru Yanagiba features the distinctive rounded, sword-like tip associated with the traditional Sakimaru Takobiki profile. Compared with a conventional pointed Yanagiba, the Sakimaru has a rather elegant, understated appearance while retaining the long cutting edge that makes these knives so effective for preparing sashimi. The single-bevel geometry, combined with the long blade, allows the user to draw through a piece of fish in one continuous motion, producing a smooth and clean cut without excessive pressure or tearing of the flesh. The blade features a beautifully polished Hira with a contrasting Kasumi finish on the Kireha, creating a clean and refined appearance that suits the character of the knife.

What I particularly appreciate about the Genbu is that it doesn't try to impress through complicated Damascus patterns or decorative features. Instead, the focus is on the quality of the forging, geometry and traditional finishing. It is certainly a specialised knife that requires some experience with single-bevel sharpening and carbon steel maintenance, but for a professional sushi chef or an enthusiast who enjoys traditional Sakai craftsmanship, the Genbu offers a very appealing combination of performance, heritage and understated beauty.

保養說明
  1. 不要切硬物!日本刀比較脆,砍骨頭是絕對不可以的!
  2. 使用後請以中性清潔劑清洗,並擦乾;
  3. 請不要用洗碗機清洗刀具,這會損傷木柄;
  4. 注意不要讓刀長時間放在熱源附近;
  5. 其實用鈍刀比用利刀危險得多!
  6. 日本廚刀最好定期使用磨刀石研磨。
  7. 若是碳鋼刀,長期存放前請上油防鏽。
  • Sakimaru Takohiki: Japanese knife profile, sumi ink on washi

    刀型:先丸蛸引

    圓尖刺身刀

    先丸蛸引是蛸引,也就是關東的生魚片刀,一家堺的刀具製造商描述它的刀尖形似日本刀。先丸意為圓頭刀尖。同一個製造商表示,它用來從魚塊拉切生魚片,與生魚片刀的工作相同,並說蛸引是單刃,因此左手用的款式會以相反方向製作。

    一部日本百科全書依刀尖為這個刀型分類:生魚片刀薄而窄,有尖頭的稱為柳刃,沒有尖頭的稱為蛸引。堺的刀具製造商表示,生魚片刀之所以長而窄,是因為切出刃口平整的薄片需要長度,得沿著整個刀身一刀拉切完成,並建議家用 240mm,專業廚師則用 300mm 以上。

    本頁列出 270 至 390mm 的先丸蛸引與先丸柳刃,有白紙二號、青紙一號與青紙二號等碳鋼,其中一些是本燒,也有銀三鋼、SG2與VG10等不鏽鋼,並有一把左手用刀。堺的刀具製造商對碳鋼的保養建議是:若濕置或沾有食物殘留就會生鏽,所以使用後立刻清洗、擦乾並上油。

    向左滑動查看更多 >>

  • 鋼材:青紙二號

    青紙二號(Aogami 2)是 Proterial(原日立金屬)的碳鋼。Proterial 的表格列出 1.05 至 1.15% 碳,搭配 0.20 至 0.50% 鉻與 1.00 至 1.50% 鎢,以及 60 HRC 以上的淬火硬度。Proterial 描述青紙二號是添加鎢與鉻以改善熱處理性能與耐磨性的合金鋼,並列出用途包括廚刀。

    它的姊妹鋼種白紙二號具有相同的碳含量範圍,但未列出鉻或鎢。兩者皆非不鏽鋼;依日本不鏽鋼協會的定義,不鏽鋼須含 10.5% 以上的鉻,所以清洗後請擦乾刀具。

    我們的青紙二號刀具來自初心、二唐、明神利器、安立、松原、正本總本店與真崎等製刀者。

    製造商:

    • 日立金屬(現 Proterial),日本

    材質特性:碳鋼

    常見硬度:61 至 63 HRC

    << 滑動查看更多 >>

  • 握柄規格

    輪廓:八角柄

    材質:

    • 黑檀木
    • 黑色水牛角

    標準八角柄,採用黑檀木製成,並搭配水牛角黑色護環。

    << 滑動查看更多