Crows Nest 門市現已於每週五至週二開放,營業時間為上午 10 點至下午 6 點。

Tanaka  |  庫存單位: TANA_B2KU_GY240

田中 青鋼二號 牛刀 240mm 黑打 灰檀

售價 $8,396.00 正常價格 $9,864.00

重要提醒:碳鋼刀如未妥善保養,容易快速生鏽或產生色變。需要定期清潔、擦乾及上油。如果您不熟悉碳鋼的保養方式,建議選擇不鏽鋼刀款。

可用性

  • St Peters(線上/展示間)
    2 Bishop St Unit 2 St Peters NSW 2044
  • Crows Nest(店面)
    107 West St, Crows Nest NSW 2065
    Pickup only
詳細規格
產品線 田中重機 KU 青二
刀型 牛刀 / 主厨刀
刃面類型 雙斜面
重量 234 g | 8.3 oz
刃渡 240 mm | 9 29/64″
刃元高度 52 mm | 2 3/64″
刃元厚度 3.0 mm | 1/8″
刃中厚度 2.2 mm | 3/32″
刃尖1cm厚度 0.8 mm | 1/32″
鋼材 青二 / 青紙二號 | 碳鋼
刀身構造 三枚夾-軟鐵夾鋼
Hardness (HRC) 61 - 63
表面處理 黑打
刀柄 八角黑查卡特木
產地 三木
推薦用途
  • 專業廚師
  • 熱愛好
  • 澳洲境內 200 澳元以上的刀具可免費送貨。
  • 透過 DHL Express 進行全球運輸,需要 3 至 5 天。


忘掉拋吧——



田中誠貴的青鋼二號系列,正是真正切菜的地方。



這是田中長期以來的經代表系列之一,備受喜愛的原因在於基本功做得極為到位:完美的刀身輪廓、真正的實用型研磨幾何結構,以及卓越的切割手感,能輕鬆應對各種食材處理。



是的,它的表面處理風格是古樸風。它不是一隻展示用的馬匹。但這正是重點所在——田中將他的技藝集中在最重要的地方:精準熱處理青鋼二號鋼材。



這讓你獲得極佳的刃口保持力,同時固的抗衝擊能力——一把為長使用而打造的刀。



這正是厚實研磨的定義:



較厚的刀背、強韌的刃緣,專為承受真實衝擊並持續切削而設計。這裡沒有精細的雷射工藝,只有可靠、每日無間斷的表現。



注意:它是碳鋼甲鐵刃物結構。這種傳奇般的韌性也伴隨著責任——它「渴望」生鏽。



認真說,請務在使用後及完畢時保持乾燥。它需要你的尊重,但會回報你驚人的切割力道。



如果你想要一把握感紮實、能輕鬆切過各種食材,並且優純粹耐用性能而非華麗表面處理的刀,這把田中青鋼二號正是你的真正碳鋼工作馬。



為研磨工藝付錢,而不是為澤——但請記得備好毛巾!Shigeki Tanaka's Blue #2 line is where real cutting happens. This is one of Tanaka's long-standing signature series, beloved for getting the fundamentals brutally right: a perfect profiletrue workhorse grind geometry, and outstanding cutting feel that powers through prep.

Yeah, the finish is rustic. It's not a show pony. But that's the point. Tanaka pours his skill where it counts: masterfully heat-treating Blue #2 steel. This gives you serious edge retention combined with solid impact resistance – a blade built for the long haul.

This is the definition of a workhorse grind: thicker spine, robust edge, built to take real impact and keep slicing. No delicate lasers here – just reliable, day-in, day-out performance.

Heads up: It's carbon steel with iron cladding. That legendary toughness comes with responsibility – it wants to rust. Seriously, just keep it dry between tasks and after washing. It demands respect, but rewards you with incredible cutting power.

If you want a knife that feels solid in handpowers through ingredients, and prioritizes pure, durable performance over fancy finishes, this Tanaka Blue #2 is your true carbon workhorse. Pay for the grind, not the gloss – just remember the towel! 

優點 缺點
  • 預算親民
  • 優異表現
  • 需額外保養
  • 易生鏽
保養說明
  1. 請勿切割硬物!日本刀較脆,絕對不可用來剁骨!
  2. 使用後以中性清潔劑清洗,並擦乾;
  3. 請勿使用洗碗機清洗刀具,會損壞木柄;
  4. 請勿將刀具長時間放置於熱源附近;
  5. 鈍刀比利刀更危險!
  6. 建議定期使用砥石磨刀以保持鋒利。
  7. 碳鋼刀若長期存放,請上油防鏽。

田中誠貴

田中誠貴 — 三木市的獨角獸刀匠

於庫縣三木市——日本刀製造的歷史重鎮——打造的田中誠貴刀,凝聚了數代鍛冶師的精湛技藝。卓越的鋒利度與平衡感著稱,這些刀採用高碳鋼(如青鋼二號)並結合傳統工法,確保極佳的刃口保持力。品牌標誌性的黑打表面處理賦予每把刀古樸、手工鍛造的外觀,同時保護刀身。

田中刀精準度、耐用性與卓越性能而深受廚師與收藏家青睞。許多作品備優的日式柄(wa),選用朴木或黑檀木製作,亦有標誌性的受鮑勃·洛夫利斯啟發的可口可樂瓶型西式鐵木柄,設計講究舒適與操控性。田中誠貴專注於純粹工藝而非華麗外觀,打造出專業級刀,致敬庫縣的武士刀製作傳承。kurouchi (blacksmith’s finish) gives each knife a rustic, hand-forged look while protecting the blade.

Tanaka’s knives are favored by chefs and collectors for their precision, durability, and exceptional performance. Many feature elegant wa (Japanese-style) handles made from magnolia or ebony, along with his signature Bob loveless inspired coke-shaped western ironwood handle, designed for comfort and control. With a focus on pure craftsmanship over flashy aesthetics, Shigeki Tanaka delivers professional-grade blades that honor Hyogo’s samurai sword-making legacy.

繼續閱讀

在庫縣三木市——日本刀製造傳統的核心地帶——手工鍛造的田中誠貴刀,代表了數代大師級鍛冶技藝的結晶。每把刀皆以高品質高碳鋼(如青鋼二號)精心打造,提供卓越鋒利度與刃口保持力。獨特的黑打表面處理保留了刀粗獷、手工鍛造的質感,同時保護鋼材。

田中刀精準與平衡性聞名,備傳統日式柄(wa),選用朴木或黑檀木製作,亦有標誌性的西式鐵木柄——靈感來自鮑勃·洛夫利斯的經「可口可樂瓶」設計——提供優越握持感與舒適度。深受專業廚師與精緻收藏家喜愛,這些刀融合了傳統技藝與細微現代改良,忠於庫縣武士刀製作的歷史遺產。無華麗噱頭——唯有完美的切割性能與永恆工藝。

(手工製造於三木市,庫——數世紀以來日本最優秀鍛冶師的鄉。)kurouchifinish preserves the knife's rugged, hand-forged character while protecting the steel.

Renowned for their precision and balance, Tanaka's knives feature both traditionalwa handles in magnolia or ebony and his signature Western-style ironwood handle—inspired by Bob Loveless's iconic "coke bottle" design—for superior grip and comfort. Favored by professional chefs and discerning collectors, these blades blend time-honored techniques with subtle modern refinements, staying true to Hyogo's samurai sword-making heritage. No flashy gimmicks—just flawless cutting performance and enduring craftsmanship.

(Handmade in Miki City, Hyogo—home to Japan's finest bladesmiths for centuries.)

“日本鋼材,洛夫利斯靈魂 —— 沙漠鐵木邂大師之刃。”

創立 1946 | 昭和21年
特色 切割性能與刀身平衡性的完美結合 | 鮑勃·洛夫利斯風格西式刀柄
官網 kanegen4th.com 了解更多 田中誠貴
田中誠貴 — 三木
Profile: 牛刀
Profile

牛刀

主厨刀

日本主厨刀稱為 Gyuto(牛刀 ぎゅうとう),字面意思為「牛肉刀」。其刀身形狀類似較扁平的法式主厨刀。日本廚刀因極銳利的刃角幾何設計與高硬度鋼材而聞名,硬度有時可超過洛氏硬度 60 HRC。典型西式主厨刀的刃角約為 20-22°,而日本 Gyuto 通常擁有更銳利的 15-18°(甚至更低)刃角,這需要更硬、更脆的鋼材等級。近年來,日本 Gyuto 在西方廚師中日益受到歡迎。

現代主厨刀是一款多功能刀具,旨在勝任多種不同的廚房任務,而非專精於單一用途。它可用於切碎、切片與切丁蔬菜,切割肉類,以及分解大塊肉品。
成分

青二 / 青紙二號 元素組成

比較對象
    青二 / 青紙二號
    1.25% 0.9% 0.6% 0.3% 0
    C 1.1%
    主要硬化元素。提高硬度與耐磨性,但過多會增加脆性與鏽蝕傾向。
    C
    1.1%
    Cr 0.35%
    提高耐蝕性;13%以上即為不鏽鋼。同時改善淬透性與耐磨性。
    Cr
    0.35%
    W 1.25%
    形成硬碳化物,提高耐磨性與持鋒性。即使在高溫下也能保持硬度。
    W
    1.25%
    Mn 0.25%
    有助於淬透性與強度。在冶煉過程中作為脫氧劑。過多會降低韌性。
    Mn
    0.25%
    Si 0.15%
    強化鋼基質並作為脫氧劑。改善硬度與抗氧化性。
    Si
    0.15%
    P 0.025%
    冶煉過程中的雜質。即使少量也會造成脆性,鋼廠盡可能降低含量。
    P
    0.025%
    S 0.004%
    降低韌性並促進脆性的雜質。僅在快削鋼中刻意添加。
    S
    0.004%
    C — 碳 Cr — 鉻 W — 鎢 Mn — 錳 Si — 矽 P — 磷 S — 硫
    硬度 61–63 HRC
    555759616365+
    鋼材
    青二 / 青紙二號
    類別
    碳鋼
    製造商
    日立特殊鋼,日本
    硬度
    61–63 HRC
    Steel

    青二 / 青紙二號

    • Manufacturer
      • 日立特殊鋼,日本
    • Nature 碳鋼
    • Hardness61–63 HRC
    藍鋼2號,亦稱青紙鋼2號,是由日立金屬生產的一款卓越高碳鋼,以白鋼2號為基礎,添加鉻與鎢進行改良。此調整提升了韌性,並形成硬質碳化物分子,顯著增強刃口保持力。雖然鋒利度與白鋼2號相當,但藍鋼2號在保刃方面略優勢。

    多用途特性而廣受喜愛,青紙鋼2號以研磨容易及抗崩刃性強著稱,是初學接觸青紙鋼刀的理想選擇。碳含量為1.0–1.2%,洛氏硬度通常可達62–63 HRC,因此成為評估青紙鋼廚刀的基準標準。
    Construction: 三枚夾-軟鐵夾鋼
    Construction

    三枚夾-軟鐵夾鋼

    三枚夾鐵是一種傳統日本刀具製作技術,將一層硬鋼芯夾在兩層較軟的鐵或鋼之間。這種結構融合了高碳鋼的優異保刃性與鋒利度,以及外層軟鐵帶來的耐用性與易於保養。三枚結構讓刀具兼具彈性與抗斷裂性,非常適合精細切割工作。較軟的外層也讓刀具更容易研磨,並隨時間產生獨特的氧化色澤,增添美感。雖然三枚夾鐵刀具需細心養護以防生鏽,但其卓越表現與獨特外觀,讓這種結構成為日本刀具的一大特色。

    Finish: 黑打
    Finish

    黑打

    黑打是指許多傳統日本廚刀上可見的粗獷、未拋光刀身表面。這種鍛造師的處理方式以其深色且帶有質感的外觀為特色,乃是在製作過程中保留鋼材鍛造時產生的氧化層。黑打仕上不僅賦予刀具獨特的美感,也有實際效益:它能形成防鏽抗蝕的保護層,並減少食材在切割時黏附於刀身。高品質手工鍛造刀常見此處理手法,強調刀具的職人精神與傳統傳承,使每把刀都獨具個性。

    Handle
    Handle

    八角黑查卡特木

    • Profile 八角和柄
    • Material
      • 黑查卡特

    黑查卡特木是一種極具價值的木材,以其深沉濃郁的棕黑色澤、細膩紋理及卓越耐久性著稱。經拋光後能展現出精緻質感,突顯其細緻且優雅的木紋。這種木材常用於高級木工製品,包括奢華家具、裝飾品及高級刀柄。

    由黑查卡特木製成的八角和柄具有俐落幾何造型,貼合手型,提升握持感與操作性。黑查卡特木的深色調與天然光澤為刀柄增添一絲高雅與無與倫比的美感,使其不僅是廚刀的實用部件,也是一件藝術品。黑查卡特木的耐用性與穩定性確保刀柄能經受廚房使用的考驗,同時長保美觀。

    1 / 5

    Frequently asked questions

    Gyuto or santoku - which should I choose?

    Both are all-purpose Japanese knives, and for most home cooks either will handle the bulk of daily prep. The choice comes down to length, blade shape, and how you like to cut.

    A gyuto is the Japanese chef's knife - typically 210 to 240mm with a gently curved edge that lets you rock and slide through cuts as well as chop. The extra length and pointed tip give you reach and versatility, from proteins to large produce.

    A santoku is shorter, usually 165 to 180mm, with a flatter profile and a rounded sheep's-foot tip. It rewards a straight up-and-down push cut, feels nimble in smaller hands or tight kitchens, and is the classic Japanese household knife.

    Rule of thumb: choose a gyuto if you want one do-everything knife with more reach, or a santoku if you prefer a compact, easy-to-control blade. Plenty of our customers end up owning both.

    ✓ Verified by Knives and Stones · James Zhang · Reviewed 29 May 2026

    Will a carbon steel knife rust, and how do I look after it?

    Yes - carbon steels such as Aogami (Blue) and Shirogami (White) react with food, moisture, and acids. Left wet they can spot or rust, and with normal use they develop a grey-blue patina. That patina is expected and is part of owning a carbon-steel knife; it is not damage.

    Care is simple once it becomes habit: hand-wash in warm water, never leave the knife soaking or sitting in a wet sink, and dry it thoroughly the moment you finish. Avoid the dishwasher entirely, and wipe the blade between tasks when you are cutting acidic foods like citrus, tomato, or onion.

    If the knife will sit unused for a while, wipe a very thin film of food-safe camellia oil (or a neutral mineral oil) onto the blade before storing it. A light surface rust spot lifts easily with a rust eraser or a little Bar Keepers Friend; sustained neglect is the only thing to really avoid.

    Carbon steel rewards this small amount of attention with a keener edge and easier sharpening than most stainless. If you would rather not think about maintenance at all, ask us about stainless or stainless-clad options instead.

    ✓ Verified by Knives and Stones · James Zhang · Reviewed 29 May 2026

    您可能也喜歡