Nigara Hamono | 庫存單位： NG-SG2TSUMAT-KGY210-IRONWOOD

Nigara SG2 Tsuchime Matt Migaki K-tip Gyuto 210mm 西部鐵木

Name: Nigara SG2 Tsuchime Matt Migaki K-tip Gyuto 210mm 西部鐵木
Brand: Nigara Hamono
SKU: NG-SG2TSUMAT-KGY210-IRONWOOD
Price: 13070.0 TWD
Availability: OutOfStock

$13,070.00

添加 Saya 或 K&S 刀卷即可獲得 20 美元的套裝折扣！

Detailed Specifications

Line	Nigara SG2 Matt Migaki Tsuchime
Profile	牛刀 / Chefs Knife
Bevel Type	雙斜面
Weight	232 g 8.18 oz
Edge Length	197 mm .7.76 inch
Heel Height	49 mm .1.93 inch
Width @ Spine	2.6 mm 0.1 inch
Width @ Mid	2.6 mm 0.1 inch
Width @ 1cm from Tip	0.8 mm 0.03 inch
Steel	SG2 / R2 \| Powdered 不鏽鋼
Blade Construction	Sanmai - Stainless Clad
Hardness (HRC)	62 - 64
Handle	Coke-bottle Shaped Western
Region	Aomori
Best for	First-timers Pro chefs

澳洲境內 200 澳元以上的刀具可免費送貨。
透過 DHL Express 進行全球運輸，需要 3 至 5 天。

This is a line up of knives produced by Nigara have excellent performance for how much they cost. Just like their well known VG10 line, these blades employed optimised fabrication procedures, allowing users to obtain a combination of sharp edge geometry and a powder stainless steel edge at a very acceptable cost.

The SG2/R2 being the most commonly used powder stainless steel in the Japanese kitchen knife industry can offer a reliable toughness and edge retention. However, the higher cost of the steel means it’s usually hard to get knives made with it under 350 AUD(210mm Gyuto). The SG2 Hayabusa produced by Hatsukokoro offers a very low price for those who want to experience this steel and its ability to hold its edge, but the Matt Migaki Tsuchime line from Nigara would have a better sharpness and food release due to its hand-sharpened, sabre grind concave edge geometry.

The overall fit and finish is just like other knives produced in similar fashion by Nigara, you can expect very consistent surface condition, straightness and rigidity throughout different profiles. The soft stainless cladding has a very pretty smooth matt finish while the core steel still has parallel polish marks left from Migaki finish. Compare to the VG10 line with Damascus cladding, this is a very simple yet elegant design, if you are looking for a slightly different look, there is a twin sister line by Nigara that comes with Kurouchi finish.

The slightly thicker thickness of the blade gives the knife more sturdiness, combining with the ease of maintenance, it allows this lineup of knives to be an excellent starting point for those who want to get into Japanese knife with have a bit more budget. And for the VG10 users looking for an upgrade, these blades offer better core steel with only a slight increase in price, but more importantly maintain a very good fit and finish and sharpness.

Pros	Cons
Excellent performance Easy to look after	Relatively hard to sharpen

Care Instruction

Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
Wash with neutral detergent after use, and wipe dry;
Please don't wash knife with dishwasher, it will damage the wood handle;
Be careful not to leave the knife close to a heat source for a long time;
It is a lot more dangerous to cut with a blunt knife than a sharp knife!
It is best to sharpen a Japanese knife regularly on a waterstone.

二唐

Based in the small yet beautiful city of Hirosaki in the northern prefecture of Aomori, Nigara hamono has been making samurai swords for 350 yearas, with master Kunitoshi (國俊) being one of the most famous sword smith in his generation. Now headed by the 8th generation mastersmith Tsuyoshi Yoshizawa (吉澤剛) supported by his father Toshiju Yoshizawa (吉澤俊寿), Nigara is becoming very popular thanks of its exquisite forging skills and second to none quality control.

個人資料：牛刀

Chefs Knife

A Japanese chef's knife is known as a gyuto (牛刀ぎゅうとう） gyūtō?), literally meaning 'beef knife'. Its blade resembles a flatter version of a French chef's knife. Japanese cutlery is known for sharpness due to its acute blade geometry, and the hardness of the steel used, sometimes exceeding 60 HRC on the Rockwell Scale A typical western chef's knife may be sharpened to an edge angle of 20-22°, while a Japanese gyuto generally has a sharper edge angle of 15-18° (or even lower), which requires a harder, more brittle grade of steel. In recent years Japanese gyuto have gained in popularity with western chefs.

A modern chef's knife is a multi-purpose knife designed to perform well at many differing kitchen tasks, rather than excelling at any one in particular. It can be used for mincing, slicing, and chopping vegetables, slicing meat, and disjointing large cuts.

滑動看更多>>
鋼材： SG2 / R2
SG2, also known as Super Gold 2 or R2 steel, is a high-end powdered tool steel by Takefu Special Steel, known for its excellent edge retention, wear resistance, and ability to achieve a hardness of up to 64 HRC. Identical to Kobelco Steel's R2, it's prized in premium knife making for its fine edge sharpness and durability. The powdered nature ensures uniform carbide distribution, enhancing toughness and reducing chipping risks. SG2/R2 is ideal for those seeking top performance and longevity in their cutting tools.

製造商：
- Takefu Special Steel, Japan
性質：不鏽鋼

硬度： 62 - 64

<<滑動看更多>>
建構： Sanmai - Stainless Clad

Sanmai(Three-Piece) is a common construction for double bevel knives where two pieces of softer cladding steel are forgewelded to each side of a harder core steel. The harder but more brittle core steel will form the hard cutting edge after heat treating, and the softer cladding will support the core to increase the overall strength of the blade.
The soft cladding enables the thinning process to be a lot easier than a honyaki or monosteel construction. And in the case where the cladding steel are stainless in nature, it can offer protection for the carbon or semi-stainless cores against rusting and discoluoring.

<<滑動看更多>>
完成：

<<滑動看更多>>
手柄規格
個人資料： Coke-bottle shaped western

材料：
- Ambonya Burl Stabilized
- Acrylic
- G10
Inspired by the legendary Bob Loveless's signature coke bottle shaped handle, this style of handle provides ergonomic benefits by offering a comfortable grip because of its tapered rear end.
The wider midsection allows for a secure hold and better control while the tapered ends facilitate a natural hand position. This design is commonly found in Western-style kitchen knives, offering both functionality and aesthetic appeal.
This handle is made by the same makers who produced the famous Shigeki Tanaka's SG2 ironwood western line.

<< 滑動查看更多