Crows Nest 商店現已開業，店內有特價！
1 6
Nakagawa  |  庫存單位： NK-GINSAN-DE180

中川銀山 K-tip Deba 180mm

$10,089.00

添加 Saya 或 K&S 刀卷即可獲得 20 美元的套裝折扣！

Detailed Specifications
Line Hatsukokoro by Nakagawa Ginsan Single bevel Kasumi
Profile 出刃
Bevel Type 單斜面
Weight 279 g        9.84 oz
Edge Length 182 mm   .7.17 inch
Heel Height 45 mm     .1.77 inch
Width @ Spine 5.4 mm     0.21 inch
Width @ Mid 4.6 mm     0.18 inch
Width @ 1cm from Tip 2.4 mm     0.09 inch
Steel Ginsan / Silver #3 | 不鏽鋼
Blade Construction Nimai - Stainless Clad
Hardness (HRC) 60 - 62
Surface Finish 霞
Handle Octagonal Ebony
Region 堺
Best for
  • Pro chefs
  • First-timers
  • Students
    		•
    • 澳洲境內 200 澳元以上的刀具可免費送貨。
    • 透過 DHL Express 進行全球運輸，需要 3 至 5 天。


    這條由中川智史鍛造的銀三系列，是初心委託製作的另一條產品線，將平（Hira，指主斜面上方的平面）以細緻磨光處理。雖然比起姊妹款鏡面拋光版本價格稍低，但因為採用不鏽鋼芯材與夾鋼，兩者都同樣容易保養。

    整把刀的拋光處理都相當不錯，無論是平面、斜面還是刀背，拋光都保持一致且細緻。圓潤的指扣和刀背也如預期般處理得當，唯一美中不足的是先丸（Sakimaru）的切先不夠明確。整體來說，在這個價格帶算是相當優秀的刀具。

    銀三鋼的運用讓這把刀更加多元。性能略優於 VG10，且因為合金含量較低，研磨起來容易許多，對於專業場合使用的單刃刀來說是極大優勢。同時，具備防鏽能力，切割時不需頻繁擦拭刀身，省去不少麻煩，所以也很推薦這系列給壽司學徒或預算較高的家庭廚師。

    鍛造這系列的中川智史，師承傳奇刀匠白木賢一超過二十年，對鋼材特性尤其是日立金屬白紙鋼極為熟悉。這份經驗保證了他對刀具的熱處理品質，因此如果你在尋找高品質的不鏽單刃刀，這系列絕對是高階的選擇。

    Pros Cons
  • Great for professionals
  • Easy to look after
    		•
  • 高預算
    		•

    Care Instruction
    1. Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
    2. Wash with neutral detergent after use, and wipe dry;
    3. Please don't wash knife with dishwasher, it will damage the wood handle;
    4. Be careful not to leave the knife close to a heat source for a long time;
    5. It is a lot more dangerous to cut with a blunt knife than a sharp knife!
    6. It is best to sharpen a Japanese knife regularly on a waterstone.
      7. Error: Steel nature unknown

    Satoshi Nakagawa

    中川刃物由中川悟志於2021年4月創立，承襲著名白木刃物的傳統，中川先生是傳奇職人白木賢一的嫡傳弟子。中川先生有近二十年經驗，主要在白木先生門下學藝，是白木先生最後五年打造頂級本燒刀的重要推手。

    他的技藝不僅止於白木刃物，也為堺孝行、菊守等堺市知名品牌鍛造頂級刀具。中川刃物總部位於大阪堺市，專精於寬刃銀三鋼及青紙鋼刀具。

    • 個人資料： 出刃

      A deba knife is a traditional Japanese kitchen knife specifically designed for butchering fish, though it can also be used for poultry and other meats with smaller bones. Here are some key characteristics and features of a deba knife:

      Blade Material: Deba knives are available in various materials, including traditional carbon steels such as shirogami (white steel) and blue steel, as well as stainless steel variants like molybdenum stainless steel. Carbon steel is preferred for its excellent sharpness and edge retention, while stainless steel variants are less prone to rust.

      Blade Design: Deba knives typically have a single bevel blade, meaning they are sharpened completely on one side. This design is intended for right-handed use, though left-handed versions are available by special order.

      Blade Geometry: The blade of a deba knife is heavy and thick-spined, with a blade length ranging from 5 to 7 inches. This design, along with the weight of the knife, allows it to easily cut through fish bones and joints.

      Primary Purpose: The primary purpose of a deba knife is to break apart full fish, removing heads, fins, and bones, and filleting them. It is also suitable for butchering poultry and other meats with smaller bones.

      Technique Tips: When using a deba knife, it's recommended to allow the weight of the blade to do the work. A sturdy grip is essential, with the middle, ring, and pinkie fingers wrapped firmly around the handle. The pointer finger should be placed on the spine of the knife, while the thumb is positioned close to the heel edge of the blade to steady the strokes. When cutting through bones, downward pressure should be applied with the non-dominant hand to push the knife cleanly through.

      滑動看更多>>

    • 鋼材： Ginsan / Silver #3

      Ginsan steel, also known as Silver 3 or G3 steel, is a type of stainless steel used in high-quality kitchen knives. It is appreciated for its ability to offer the traditional feel and sharpness of carbon steel while providing the corrosion resistance of stainless steel. Ginsan steel contains a moderate amount of carbon, chromium, and other alloying elements that ensure a good balance between edge retention and ease of sharpening. This steel is particularly favored for its fine grain structure, which allows for a very sharp edge, and its resistance to rust makes it a popular choice among professional chefs and home cooks who seek the performance of carbon steel without the maintenance challenges. Ginsan steel knives are known for their durability, ease of care, and excellent cutting performance, making them a preferred option for those looking for high-quality stainless steel cutlery.

      製造商：

      • 日立特殊鋼，日本

      性質： 不鏽鋼

      硬度： 60 - 62

      <<滑動看更多>>

    • 建構： Nimai - Stainless Clad

      二枚（Nimai，兩層）是日本傳統廚刀製作方式，常見於柳刃、出刃、薄刃等原生日式刀具。製作時，將一片軟夾鋼貼合於芯鋼，兩片金屬鍛焊後再塑形為刀。

      二枚刀通常採用單刃研磨方式，硬化芯鋼裸露於刀身的平面或凹面一側，軟夾鋼則包覆另一側並延伸至背部。軟夾鋼為較硬且脆的芯鋼提供支撐，使刀刃既可保持鋒利又兼具一定強度。由於日式單刃刀通常沒有次刃，軟夾鋼與凹面研磨的結合，讓研磨過程比單鋼或本燒刀更容易。

      近年來，刀匠們開始在傳統以碳鋼鍛造的二枚刀上嘗試使用不鏽鋼夾層。但與三枚構造不同，即使不鏽鋼夾層能保護一側，芯鋼仍會在凹面裸露。現今市售的不鏽鋼夾二枚刀，通常會搭配不鏽鋼芯鋼與不鏽鋼夾層，使二枚及傳統單刃刀對有興趣的用家來說更容易入門。

      <<滑動看更多>>

    • 完成： 霞

      霞（Kasumi）是一種日本傳統刀具表面處理技法，特別用於軟鐵與硬鋼結合製成的刀具。Kasumi意為「霧」，形容刀身斜面兩種金屬交界處呈現的朦朧啞光質感。這種效果不僅美觀，更展現職人融合不同金屬的高超技藝，突顯刀具兼具美感與實用性。

      <<滑動看更多>>

    • 手柄規格

      個人資料： 八角和柄

      材料：

      • Ebony

      這款手柄以整塊烏木精心製作，展現出極簡優雅與實用設計。其獨特的八角形結構，配合微妙的收腰設計，帶來舒適的握感與吸睛的幾何輪廓。烏木因其深邃色澤與耐用性聞名，這款手柄由單一木塊細緻切割而成，確保無縫結構，完美呈現木材的天然美感與紋理。表面經高度拋光，呈現亮澤質感，不僅突顯烏木的奢華深色，也為使用者帶來順滑的觸感。這種設計體現極簡主義，專注於簡潔、品質與實用性。八角形結構結合收腰設計，為經典材質注入現代感，使其成為融合傳統工藝與當代美學的亮眼之作。

      << 滑動查看更多

    Nakagawa

    中川銀山 K-tip Deba 180mm

    $10,089.00
    傳奇工匠白木健一退休後，中川先生作為白木先生近 20 年的弟子，擔任白木刃物（現為中川刃物）的負責人。 事實上，白木先生的許多作品，包括最近5年多來的《本燒》，都是由中川先生完成的。 Nakagawa-san 也為 Sakai 零售商的一些頂級系列鍛造刀具，即 Sakai Kikumori、Sakai Jikko 和其他一些品牌。 因此，K&S 現在非常高興和榮幸地推出 Nakagawa 先生的最新作品，主要是具有寬斜面特徵的 Ginsan 鋼，在不久的將來還會推出更多型材和各種鋼材。
    查看產品
    回到頂部