Crows Nest 商店現已開業,店內有特價!

Sakai Takayuki  |  庫存單位: SATA_TOKU_DE165

堺貴之 白 2 德城出羽 165mm

$7,454.00

添加 Saya 或 K&S 刀卷即可獲得 20 美元的套裝折扣!

Detailed Specifications
Profile 出刃
Bevel Type 單斜面
Weight 246 g        8.68 oz
Edge Length 168 mm   .6.61 inch
Heel Height 48 mm     .1.89 inch
Width @ Spine 6.4 mm     0.25 inch
Width @ Mid 5.1 mm     0.2 inch
Width @ 1cm from Tip 2.3 mm     0.09 inch
Steel 白二/白紙二號 | 碳鋼
Hardness (HRC) 60 - 64
Handle D Shaped Ho Wood Black Ferrule
  • 澳洲境內 200 澳元以上的刀具可免費送貨。
  • 透過 DHL Express 進行全球運輸,需要 3 至 5 天。



Care Instruction
  1. Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
  2. Wash with neutral detergent after use, and wipe dry;
  3. Please don't wash knife with dishwasher, it will damage the wood handle;
  4. Be careful not to leave the knife close to a heat source for a long time;
  5. It is a lot more dangerous to cut with a blunt knife than a sharp knife!
  6. It is best to sharpen a Japanese knife regularly on a waterstone.
  7. Error: Steel nature unknown
  • 個人資料: 出刃

    A deba knife is a traditional Japanese kitchen knife specifically designed for butchering fish, though it can also be used for poultry and other meats with smaller bones. Here are some key characteristics and features of a deba knife:

    Blade Material: Deba knives are available in various materials, including traditional carbon steels such as shirogami (white steel) and blue steel, as well as stainless steel variants like molybdenum stainless steel. Carbon steel is preferred for its excellent sharpness and edge retention, while stainless steel variants are less prone to rust.

    Blade Design: Deba knives typically have a single bevel blade, meaning they are sharpened completely on one side. This design is intended for right-handed use, though left-handed versions are available by special order.

    Blade Geometry: The blade of a deba knife is heavy and thick-spined, with a blade length ranging from 5 to 7 inches. This design, along with the weight of the knife, allows it to easily cut through fish bones and joints.

    Primary Purpose: The primary purpose of a deba knife is to break apart full fish, removing heads, fins, and bones, and filleting them. It is also suitable for butchering poultry and other meats with smaller bones.

    Technique Tips: When using a deba knife, it's recommended to allow the weight of the blade to do the work. A sturdy grip is essential, with the middle, ring, and pinkie fingers wrapped firmly around the handle. The pointer finger should be placed on the spine of the knife, while the thumb is positioned close to the heel edge of the blade to steady the strokes. When cutting through bones, downward pressure should be applied with the non-dominant hand to push the knife cleanly through.

    滑動看更多>>

  • 鋼材: 白二/白紙二號

    白鋼二號,也稱為白紙二號,長期以來被視為製作高級日本廚刀的首選鋼材。這種鋼材以能打造出鋒利刀刃、適中韌性及持久鋒利度著稱,且相對容易研磨。雖然其碳含量(C: 1%)略低於白鋼一號(C: 1.3%),但仍需高超工藝才能有效鍛造。熟練鍛造師的專業技藝對將此材料轉化為高品質廚刀至關重要。儘管品質優異,白鋼二號也以極易氧化聞名,因此使用後需立即擦拭並徹底乾燥,以防止生鏽。

    三條與堺都廣泛運用白紙二號於主流廚刀產品中。

    製造商:

    • 日立特殊鋼,日本

    性質: 碳鋼

    硬度: 60 - 64

    <<滑動看更多>>

  • 建構:

    <<滑動看更多>>

  • 完成:

    <<滑動看更多>>

  • 手柄規格

    個人資料: D 形和柄

    材料:

    • 朴木
    • 黑水牛角

    這是一款許多正本總本店及東京刀匠愛用的經典手柄。輕巧、防滑且實用。不過因為其有方向性,出廠時需預先考慮右手或左手操作。

    << 滑動查看更多

Sakai Takayuki

堺貴之 白 2 德城出羽 165mm

$7,454.00

Tokujou系列是日本最暢銷的專業刀具,採用安來白2鋼。 Tokujou系列由1996年榮獲堺市傳統工藝師獎的富樫健二大師手工打造。他被譽為同行中最優秀的刀匠之一。刀身合體,做工精良。 

 

測量

  測量

重量 

206克

總長度

292毫米

腳尖到腳跟的長度

156毫米

鏟刀根部高度

49毫米 

脊椎至腳跟的寬度 

5.4 毫米

葉片中部脊寬

4.8 毫米

距尖端約1公分處的脊椎寬度

2.3 毫米

維護: 

查看產品