PRAHRAN STORE NOW OPEN · THU–MON · 10AM–6PM

Hatsukokoro  |  SKU: HATS_KRKZ_W2_DE180-WG

Hatsukokoro Kurokaze Blue 2 Deba 180mm Double Bevel Kurouchi

Regular price $4,546.00

IMPORTANT: Carbon steel knives can rust or patina quickly if not cared for properly. They require regular cleaning, drying, and oiling. If you are unfamiliar with carbon steel maintenance, we recommend choosing a stainless steel option instead.

Sold out right now

Leave your email and we’ll send one message the moment it’s back in stock.

One email, no marketing. Privacy policy.

Availability

  • St Peters, NSW —
    2 Bishop St, Unit 2, St Peters NSW 2044
  • Crows Nest, NSW —
    107 West St, Shop 1, Crows Nest NSW 2065
    Pickup only
  • Prahran, VIC —
    180 Commercial Road, Shop 1, Prahran VIC 3181
    Pickup only
Detailed Specifications
Line Hatsukokoro Kurokaze Blue 2 Kurouchi Deba
Profile Deba / Japanese Fish Knife
Bevel Type Double Bevel
Weight 321 g | 11.3 oz
Edge Length 176 mm | 6 59/64″
Heel Height 56 mm | 2 13/64″
Width @ Heel 8.0 mm | 5/16″
Width @ Mid 6.3 mm | 1/4″
Width @ 1cm from Tip 2.5 mm | 3/32″
Steel Blue 2 / Aogami #2 | Carbon
Blade Construction Sanmai - Soft Iron Clad
Hardness (HRC) 61 - 63
Surface Finish Kurouchi
Handle Octagonal Wenge Handle Black Ferrule
Region Hyogo
Best for
  • First-timers
  • Pro chefs
  • Free shipping for knives over AU$200 Australia wide.
  • World-wide shipping via DHL Express, 3 to 5 days.


The Yo-deba has existed as a category for a while — a double bevel interpretation of the traditional single bevel Deba, designed for fish butchery without the asymmetric grind that makes conventional Debas handed and technique-dependent. Hatsukokoro's Kurokaze (黒風, Black Wind) Blue 2 takes that concept and adds a K-tip, giving the knife a thin, precise point that opens up finer dissection work when breaking down a fish — the kind of detail work where a traditional Deba's blunter tip can feel limiting. It's a small but genuinely useful addition to a well-established format.

The double bevel construction makes this an ambidextrous knife, which removes the left or right hand distinction that comes with traditional single bevel Debas. For anyone who wants to experience Deba-style fish butchery without committing to the learning curve of single bevel technique, this is a very practical entry point. The trade-off compared to a traditional Deba is a slight increase in weight — the absence of the hollowed Urasuki on the back of the blade means there's more material present, which adds a little heft. For a Deba this isn't necessarily a drawback; the weight assists in the chopping and splitting motions the knife is designed for, though it's worth knowing before committing.

The construction is Sanmai with soft iron cladding over a Blue 2 (Aogami 2) core, and at this price point that's worth noting. Most Debas with a more refined finish at a similar price tend to use SK steel — a lower carbon general purpose steel — rather than a proper high carbon cutlery steel like Blue 2. The Kurouchi finish keeps things rustic and the fit and finish reflects that, but the steel underneath is the real story here. The entire blade requires regular maintenance to prevent rust, which is the standard commitment for any iron-clad carbon steel knife. For first-time Deba users and professional chefs who want an approachable, ambidextrous fish butchery knife with genuine carbon steel performance at an honest price, the Kurokaze Blue 2 is a well thought out option.

Pros Cons
  • Exceptional profile
  • Budget friendly
  • Ideal entry point to Japanese knives
  • Heavy
  • Prone to rust
Care Instruction
  1. Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
  2. Wash with neutral detergent after use, and wipe dry;
  3. Please don't wash knife with dishwasher, it will damage the wood handle;
  4. Be careful not to leave the knife close to a heat source for a long time;
  5. It is a lot more dangerous to cut with a blunt knife than a sharp knife!
  6. It is best to sharpen a Japanese knife regularly on a waterstone.
  7. Oil the (carbon) knife if storing for an extended period of time to prevent rust.

Hatsukokoro

Rising star of the industry

Hatsukokoro as a brand works extensively with the Japanese kitchen knife industry. Through collaboration with makers and manufacturers across the Japan, they’ve designed and created a huge collection of different knives, covering every possible price range while having a great value in many of their product lines. Their capabilities to incorporate resources have built a strong relation with knife makers, and more and more are happy to send their knives down to Amagasaki and have them delivered across the world.

“The rapidly expanding new brand in the industry based in Amagasaki, offering great varieties by working close with different makers across entire Japan to the entire globe while innovating in product design and metal fabrication.”

Est. 2019 | 令和元年
Known for Unrivalled product availability, exceptional performance at a highly competitive price.
Website handk.co Instagram @handk_official Read more about Hatsukokoro
Hatsukokoro — Hyogo

Knife details

Profile: Deba
Profile

Deba

Japanese Fish Knife

A Deba(出刃) knife is a traditional Japanese kitchen knife specifically designed for butchering fish, though it can also be used for poultry and other meats with smaller bones. Deba typically have a single bevel blade, meaning there is a bevel on one side and Ura or concavity on the other. This design is intended for right-handed use, though left-handed versions are available by special order. Commonly, Deba are made in sizes ranging from 150mm to 210mm, length longer than that is available, but those would be extremely unwieldy due to the weight. This weight comes from the thick blade of the Deba, and the thickness gives these knives the necessary strength and weight needed for beak apart the whole fish.
Composition

Blue 2 / Aogami #2 Element Composition

Compare with
    Blue 2 / Aogami #2
    —
    1.25% 0.9% 0.6% 0.3% 0
    C
    1.1%
    Cr
    0.35%
    W
    1.25%
    Mn
    0.25%
    Si
    0.15%
    P
    0.025%
    S
    0.004%
    C — Carbon Cr — Chromium W — Tungsten Mn — Manganese Si — Silicon P — Phosphorus S — Sulfur

    Typical values from third-party sources.

    Hardness 61–63 HRC
    555759616365+
    Steel
    Blue 2 / Aogami #2
    Category
    Carbon
    Manufacturer
    Hitachi Special Steel, Japan 🇯🇵
    Hardness
    61–63 HRC
    Steel

    Blue 2 / Aogami #2

    • Manufacturer
      • Hitachi Special Steel, Japan
    • Nature Carbon
    • Hardness61–63 HRC
    Blue Steel No.2, also recognized as Aogami No.2, is a distinguished high carbon steel produced by Hitachi Metals Ltd, enhanced by the addition of chromium and tungsten to the base of White Steel No.2. This modification brings about an improvement in toughness and the creation of hard carbide molecules, which significantly boost edge retention. Although its sharpness is comparable to that of White Steel No.2, Blue Steel No.2 offers a slight advantage in maintaining its edge.

    Widely favored for its versatility, Aogami No.2 is celebrated for its ease of sharpening and robust resistance to chipping, making it an ideal choice for those new to Aogami steel knives. Containing 1.0–1.2% carbon and achieving a typical hardness of 62–63 HRC on the Rockwell scale, it stands as the benchmark in evaluating Aogami steel cutlery.
    Construction: Sanmai - Soft Iron Clad
    Construction

    Sanmai - Soft Iron Clad

    Sanmai iron cladding is a traditional Japanese knife construction technique where a hard steel core is sandwiched between two layers of softer iron or steel. This method combines the superior edge retention and sharpness of high-carbon steel with the durability and ease of maintenance provided by the softer outer layers. The sanmai structure offers a balanced knife that is both flexible and resistant to breaking, ideal for precision cutting tasks. The softer outer layers also facilitate easier sharpening and contribute to the aesthetic appeal of the knife through the development of a unique patina over time. While sanmai-clad knives require careful maintenance to prevent rust, their exceptional performance and distinctive appearance make them often a desirable feature of Japanese knives.

    Finish: Kurouchi
    Finish

    Kurouchi

    Kurouchi refers to the rustic, unpolished finish found on the blade of many traditional Japanese kitchen knives. This blacksmith's finish is characterized by its dark, textured appearance, which is the result of leaving the blade forge-scale on the steel during production. Kurouchi finish not only adds a unique aesthetic appeal but also provides certain practical benefits. It acts as a protective layer against rust and corrosion, and helps to reduce food sticking to the blade during cutting. Commonly seen on high-quality, hand-forged knives, the kurouchi finish emphasizes the artisanal nature of the knife and its heritage, making each piece distinctively unique.

    Handle
    Handle

    Octagonal Wenge Handle Black Ferrule

    • Profile Octagonal WA
    • Material
      • Wenge

    A wenge WA handle with an octagonal profile and a black ferrule. The pictured handle has dark and lighter brown streaks along the wood.

    1 / 5

    Frequently asked questions

    Will a carbon steel knife rust, and how do I look after it?

    Yes - carbon steels such as Aogami (Blue) and Shirogami (White) react with food, moisture, and acids. Left wet they can spot or rust, and with normal use they develop a grey-blue patina. That patina is expected and is part of owning a carbon-steel knife; it is not damage.

    Care is simple once it becomes habit: hand-wash in warm water, never leave the knife soaking or sitting in a wet sink, and dry it thoroughly the moment you finish. Avoid the dishwasher entirely, and wipe the blade between tasks when you are cutting acidic foods like citrus, tomato, or onion.

    If the knife will sit unused for a while, wipe a very thin film of food-safe camellia oil (or a neutral mineral oil) onto the blade before storing it. A light surface rust spot lifts easily with a rust eraser or a little Bar Keepers Friend; sustained neglect is the only thing to really avoid.

    Carbon steel rewards this small amount of attention with a keener edge and easier sharpening than most stainless. If you would rather not think about maintenance at all, ask us about stainless or stainless-clad options instead.

    Blue 2 vs White 2 steel for Japanese kitchen knives

    Blue 2 (Aogami #2) and White 2 (Shirogami #2) are both Hitachi high-carbon steels, but Blue 2 adds chromium and tungsten to White 2’s base, giving it noticeably better edge retention while keeping similar sharpness. The trade-off is that Blue 2 is slightly more abrasion-resistant during sharpening, so it takes a little more time to refine an edge, whereas White 2 is easier to sharpen and can take a finer, more aggressive edge but dulls faster in use.

    You May Also Like