Crows Nest store now open, in store specials!

1 6
Nigara Hamono  |  SKU: NIGA_SGAM_KPT150BLUTQS

Nigara Anmon (暗紋) SG2 Raindrop Damascus K-tip Petty 150mm Western Blue Turquoise

$14,132.00

Add a saya or K&S Knife Roll to receive $20 bundle discount!

Set currency to AUD to view correct price matching.
K&S Price: AU $14,132.00* inc. tax , vs:
Chef Knives to Go US AU $650.47 --95.4%
Chefs' Edge AU AU $607.5 --95.7%
Tokushu Knife US AU $606.0 --95.71%
Stay Sharp CA AU $638.0 --95.49%

* For overseas buyers you pay no GST (10%) and low shipping rate.
Last Update: 2024-06-04T01:01:25Z

Detailed Specifications
Line Nigara Anmon SG2 Special Western Handle
Profile Petty / Utility, Paring
Bevel Type Double Bevel
Weight 137 g        4.83 oz
Edge Length 140 mm   .5.51 inch
Heel Height 30 mm     .1.18 inch
Width @ Spine 2.0 mm     0.08 inch
Width @ Mid 1.6 mm     0.06 inch
Width @ 1cm from Tip 1.0 mm     0.04 inch
Steel SG2 / R2 | Powdered Stainless
Blade Construction Sanmai - Stainless Damascus Clad
Hardness (HRC) 62 - 64
Surface Finish Etched
Handle Coke-bottle Shaped Western
Region Aomori
Best for
  • Enthusiasts
  • Collectors
    		•
    • Free shipping for knives over AU$200 Australia wide.
    • World-wide shipping via DHL Express, 3 to 5 days.


    The Anmon SG2 series consist knives of various construction and sizes, all clad in 25 layers of forged damascus on each side of the blade. The ripple markings on the finely polished steel, distinctive of Tsugaru forging, is an original technique of the Nigara Forging. These Special Western handle Anmon are fitted with hand-shaped coke bottle profile ergonomic handles, often comes in unique and exotic materials, adding a unique glare to the already breathtaking Anmon blades.

    The “Anmon” design was inspired by the rippling water of the Anmon Waterfalls, cascading from the foot of the World Heritage Shirakami Mountains adjacent to the city of Hirosaki. Old growth beech and pine encompass the Anmon falls where the cool mountain stream cascades down from the precipitous rocks above. The sight of the rippling waterfall has enchanted its visitors with its mystical power.

    However, a interview with the Toshiju Yoshizawa reveals the personal inspiration for him, he said it was Andy Warhol's painting of John Lennon, specifically the fascinating distortion in his glasses that lead him to this design.

    Combining this pattern with a matte etched surface, the Anmon line gets a truely breathtaking, high contrast look. This dazziling appearance combines the great edge retentionof the SG2 powder stainless steel, result a series of knives excels in all aspects. There is a reason that these knives are sold very quickly despite the high price of them.

    Pros Cons
  • Highly collectable
  • Great artistic
  • Excellent fit and finish
    		•
  • High budget
  • Etched damascus can be hard to maintain
    		•

    Care Instruction
    1. Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
    2. Wash with neutral detergent after use, and wipe dry;
    3. Please don't wash knife with dishwasher, it will damage the wood handle;
    4. Be careful not to leave the knife close to a heat source for a long time;
    5. It is a lot more dangerous to cut with a blunt knife than a sharp knife!
    6. It is best to sharpen a Japanese knife regularly on a waterstone.

    Nigara

    Based in the small yet beautiful city of Hirosaki in the northern prefecture of  Aomori, Nigara hamono has been making samurai swords for 350 yearas, with master Kunitoshi  (國俊) being one of the most famous sword smith in his generation. Now headed by the 8th generation mastersmith Tsuyoshi Yoshizawa (吉澤 剛) supported by his father Toshiju Yoshizawa (吉澤 俊寿), Nigara is becoming very popular thanks of its exquisite forging skills and second to none quality control. 

    • Profile: Petty

      Utility, Paring

      The Petty knife, a smaller Japanese utility knife, serves as an ideal tool for precision tasks such as peeling, trimming, and slicing fruits and vegetables. With a blade length ranging from 120mm to 180mm (4.7 to 7 inches), it stands out for its ability to handle detailed work like deveining shrimp or cutting garnishes. Its slightly longer and slimmer profile compared to the Western paring knife enhances its functionality for intricate tasks, making it a valuable addition to any kitchen toolkit.

      Slide for more >>

    • Steel: SG2 / R2

      SG2, also known as Super Gold 2 or R2 steel, is a high-end powdered tool steel by Takefu Special Steel, known for its excellent edge retention, wear resistance, and ability to achieve a hardness of up to 64 HRC. Identical to Kobelco Steel's R2, it's prized in premium knife making for its fine edge sharpness and durability. The powdered nature ensures uniform carbide distribution, enhancing toughness and reducing chipping risks. SG2/R2 is ideal for those seeking top performance and longevity in their cutting tools.

      Manufacturer:

      • Takefu Special Steel, Japan

      Nature: Stainless

      Hardness: 62- 64

      << Slide for more >>

    • Construction: Sanmai - Stainless Damascus Clad

      Sanmai(Three-Piece) is a common construction for double bevel knives where two pieces of softer cladding steel are forgewelded to each side of a harder core steel. The harder but more brittle core steel will form the hard cutting edge after heat treating, and the softer cladding will support the core to increase the overall strength of the blade.

      Damascus Sanmai utilize damascus steel as the cladding material for the Sanmai construction, which adds aesthetic feature to the blade. On the Kitchen knives with stainless core steel, the damascus cladding will be stainless, this means they will also protect the carbon/semi-stainless core from rusting/discolouration.

      The soft cladding enables the thinning process to be a lot easier than a honyaki or monosteel construction. However, when the cladding is made of damascus, whether etched, polished or mirror polished, the thinning process will take a toll on the cladding, meaning the damascus won't look the same as when it was taken out of the box.

      << Slide for more >>

    • Finish: Etched

      The etching process starts with the knife being thoroughly cleaned to remove any oils or residues. A protective mask may be applied to the areas not intended to be etched. The blade is then submerged in an acidic solution, such as ferric chloride, which reacts with the different layers of steel at varying rates. This creates a layer of dark oxide on the surface of the blade where the thickness of the oxide varies according to the reactiveness of the steel. After etching, the knife is neutralized in a baking soda solution, rinsed, and dried. The final step involves polishing the blade to highlight the etched design, enhancing both the knife's beauty and showcasing the craftsmanship of its maker.

      << Slide for more >>

    • Handle Specs

      Profile: Coke-bottle shaped western

      Material:

      • Ambonya Burl Stabilized
      • Acrylic
      • G10

      Inspired by the legendary Bob Loveless's signature coke bottle shaped handle, this style of handle provides ergonomic benefits by offering a comfortable grip because of its tapered rear end.

      The wider midsection allows for a secure hold and better control while the tapered ends facilitate a natural hand position. This design is commonly found in Western-style kitchen knives, offering both functionality and aesthetic appeal.

      This handle is made by the same makers who produced the famous Shigeki Tanaka's SG2 ironwood western line.

      << Slide for more

    Nigara Hamono

    Nigara Anmon (暗紋) SG2 Raindrop Damascus K-tip Petty 150mm Western Blue Turquoise

    $14,132.00

    Introduced in late 2021, Nigara SG2 Anmon line features the state-of-the-art Super Gold 2 powdered steel with excellent edge retention, toughness and extreme sharpness, along with their signature Anmon (raindrop damascus) pattern.

    =========

    Nigara Hamono is gaining a lot of popularity recently, thanks to their superior cutting performance, great artistics and more than reasonable pricing. 

    At the moment, the most popular line by Nigara is their Kurouchi SG2 line, featuring rustic hand forged Kurouchi hammered pattern, high performances Super Gold 2 powdered steel by Takefu Special Steel, with a comfortable price range between $300 to $500 range. 

     

    (The Nigara SG2 Kurouchi Tsuchime Santoku 180mm)

    What really makes Nigara standout from the other makers, is their Anmon damascus line, with the uniquely beautiful, yet hard to forge ringdrop damascus pattern. Their blue 2 subseries are only found in their single bevel offerings, while the SRS-13 subline is super hard to obtain and expensive. 

     

    (Unicron but hard to obtain Nigaran Anmon SRS-13 Gyuto)

    In late 2021, Nigara enhanced their product line by combining the much easier-to-obtain SG2 steel with their Anmon pattern resulting in some truly stunning knives!

    Knives and Stones is proud to be among the first retailers to launch the Nigara SG2 Anmon line.  

    (The Nigara SG2 Anmon line)

    Measurements 

     

      210 mm 240mm 270mm
    Weight 144 g 165 g 190 g
    Total Length 333 mm 375 mm 405 mm
    Tip to Heel Length 176 mm 227 mm 257 mm
    Balde Height at Heel 48 mm 48.2 mm 53 mm
    Width of Spine Above Heel 1.8 mm 1.8 mm 1.9 mm
    Width of Spine at Middle of Blade 1.6 mm 1.6 mm 1.6 mm
    Width of Spine at about 1 cm from tip 1.0 mm 1.0 mm 1.0 mm

     

    Steel type: Takefu SG2 Powdered Stainless Steel Core with Stainless Damascus clad

    Hardness: HRC 62-64

    Handle Design: K&S Octagonal teak handle with options

     

    View product
    Back to top